Check out the BG website by clicking here.
We are proud to partner with bg products
At Wear Master, we proudly offer BG Products, the trusted choice for professional-grade automotive maintenance. Designed to optimize vehicle performance, extend the life of critical components, and keep your car running like new, BG Products deliver superior results that drivers can rely on.
Why Choose BG Products for Your Vehicle?
BG Products are engineered with advanced formulations that go beyond basic maintenance. These products tackle the toughest automotive challenges, from fuel system deposits to engine sludge, ensuring your car performs at its best every mile.
BG 44K - Fuel System Cleaner
-
A BG 44K® Fuel System Service is a professional-grade maintenance procedure that uses BG 44K® fuel system cleaner to remove carbon deposits and buildup from your vehicle’s fuel system.
Over time, deposits can accumulate on fuel injectors, intake valves, and combustion chambers, reducing fuel efficiency, engine performance, and causing issues like rough idling or hesitation.
During this service, BG 44K® is added directly to the fuel tank. As the engine runs, the cleaner works to dissolve stubborn deposits throughout the fuel system, restoring optimal fuel flow and combustion. This process improves engine performance, enhances fuel economy, and reduces harmful emissions.
-
The BG 44K® service is typically recommended every 10,000 to 15,000 miles, especially for vehicles experiencing performance issues or using lower-quality gasoline.
Regular use of BG 44K® helps keep your fuel system clean, ensuring your engine runs smoothly and efficiently.
BG Battery Service & Leak Detector
-
BG Battery Cleaner & Leak Detector removes accumulated deposits from battery terminals, cables, and carriers from power-sapping corrosives that shorten battery life.
It contains an unique acid-detecting ingredient that turns red in the presence of acid. If acid is detected, it’s an indication for additional cleaning needed or the presence of a crack or leak around the terminals.
This service also include the installation of anti-corrosion pads at the battery terminals, to provide long last protection.
-
BG Battery Service & Leak Detector is recommended to be done every 2 years, when corrosion or a leak is present, or when a new battery is installed.
BG Brake Fluid Flush
-
A brake fluid flush involves drainingthe old, contaminated brake fluid from the brake system, then flushing the system with fresh brake fluid to remove any moisture or debris. New fluid is added to the master cylinder, and the system is checked for proper fluid levels. Finally, the brakes are tested to ensure proper function and responsiveness, ensuring your braking system operates safely and efficiently.
Over time, brake fluid can absorb moisture from the air, which can lead to a decrease in its effectiveness, cause corrosion in the brake system, and even lead to brake failure if not addressed.
-
A brake fluid flush is typically recommended every 2 years or 24,000 miles, but this can vary depending on your vehicle’s manufacturer guidelines and the type of brake fluid used.
If you notice any signs like a soft brake pedal, reduced braking performance, or dark, contaminated fluid, it may be time for a flush, even if you haven't reached the recommended interval.
Regular brake fluid maintenance ensures your braking system remains reliable and effective.
BG EPR w/ MOA
-
When used together, BG EPR (engine performance restoration) and BG MOA (motor oil additive) provide a comprehensive solution for engine cleaning and protection.
BG EPR first cleans the engine by breaking down and removing sludge and carbon buildup, which restores oil flow and improves engine performance.
After the oil change, BG MOA is added to the fresh oil, offering superior protection against oxidation and heat, while preventing sludge formation.
This combination provides an additional 2000 miles before your next needed oil change, maximizes engine longevity, reduces wear, and ensures that your engine continues to run smoothly and efficiently, making it an ideal choice for vehicles with higher mileage or those in need of preventative maintenance.
-
A BG EPR (engine performance restoration) w/ MOA (motor oil additive) is recommended to be done any time you go over your recommended oil change mileage or with every 2-3 oil changes depending on the age of the vehicle.
BG Coolant Flush
-
A coolant flush is a maintenance procedure in which old, contaminated coolant (antifreeze) is drained from the vehicle’s radiator and cooling system, and the system is then cleaned and refilled with fresh coolant.
Over time, coolant can become ineffective due to the buildup of rust, scale, and other debris, which can lead to poor engine cooling, overheating, and potential damage to the radiator and other cooling components.
A coolant flush helps remove these impurities, restores optimal cooling system performance, and prevents overheating, ensuring your engine runs at the right temperature and prolonging the life of your vehicle’s cooling system.
-
A coolant flush is generally recommended every 2 to 5 years or 30,000 to 50,000 miles, depending on your vehicle's make and model, as well as the type of coolant used. However, it's always best to consult your vehicle’s owner's manual for the specific maintenance intervals.
If you notice signs like overheating, coolant discoloration, or a sweet smell coming from the engine, it might be time to get a coolant flush sooner, even if the recommended interval hasn't been reached.
Regular coolant maintenance helps prevent engine overheating and protects the radiator and other cooling system components.
BG Differential service
-
A differential service involves the inspection, maintenance, and replacement of the fluid in your vehicle’s differential. The differential is a critical component of the drivetrain that allows the wheels to rotate at different speeds, especially when turning. Over time, the fluid in the differential can break down, become contaminated, or lose its lubricating properties, which can lead to increased wear and potential damage to the gears inside the differential.
During a differential service, the old fluid is drained, and the differential is inspected for any signs of damage or wear. Fresh, manufacturer-recommended fluid is then added to ensure the gears are properly lubricated and protected. This service helps maintain the differential's performance, reduces friction and wear, and extends the lifespan of the vehicle's drivetrain components.
-
Differential services are typically recommended every 30,000 to 60,000 miles, but the interval can vary depending on the vehicle and driving conditions. For example, vehicles that tow heavy loads or frequently drive in harsh conditions may require more frequent differential services.
BG Fuel induction cleaning service
-
The BG Fuel Induction Cleaning Kit Service is a comprehensive service designed to clean the entire fuel system of a vehicle, including the fuel injectors, intake valves, combustion chambers, and the air intake system. Over time, carbon deposits and other contaminants can build up in these areas, leading to reduced engine performance, decreased fuel efficiency, rough idling, and poor acceleration.
During the BG Fuel Induction Cleaning service, specialized cleaning chemicals from the BG Fuel Induction Cleaning Kit are introduced into the fuel system while the engine is running. These chemicals break down and remove carbon deposits and other contaminants, restoring proper airflow and fuel atomization.
This service helps improve engine responsiveness, fuel efficiency, and overall performance.
-
The BG Fuel Induction Cleaning service is typically recommended every 15,000 to 30,000 miles, depending on the vehicle and driving conditions, but can be done more frequently for vehicles experiencing performance issues like rough idling or sluggish acceleration.
It’s a great preventative measure to keep the fuel system clean and functioning properly.
BG Fuel System Drier & Ethanol Corrosion Prevention service
-
The BG Fuel System Drier and Ethanol Corrosion Prevention Service is designed to protect your vehicle’s fuel system from the harmful effects of ethanol-blended fuels and moisture contamination. Ethanol in fuel can attract moisture, leading to water buildup in the fuel system. This moisture can cause rust and corrosion, degrade fuel injectors, and reduce overall engine performance.
During this service, the BG Fuel System Drier is added to the fuel tank. This product absorbs and removes moisture from the fuel system, preventing rust and corrosion while maintaining proper fuel combustion. It also helps to stabilize ethanol-blended fuels, ensuring smooth engine operation and improved fuel efficiency.
-
This service is typically recommended every 10,000 to 15,000 miles or during seasonal changes to ensure optimal fuel system health. It’s especially valuable for vehicles that regularly use ethanol-blended fuels or experience infrequent use, as these conditions can increase the risk of moisture accumulation and corrosion.
Regular use helps maintain peak engine performance and protects the fuel system over time.
BG Power Steering Fluid Flush
-
A BG Power Steering Fluid Flush is a maintenance service designed to replace old, degraded power steering fluid with fresh fluid to ensure optimal performance and protect the power steering system.
Over time, power steering fluid can break down due to heat, contamination, and normal wear, leading to reduced effectiveness, increased steering effort, and potential damage to system components like the pump and steering rack.
During the service, the old power steering fluid is completely flushed from the system, removing sludge, debris, and other contaminants that can cause wear or clogging. Fresh, high-quality BG power steering fluid is then added, restoring proper lubrication and hydraulic function.
-
This service is typically recommended every 30,000 to 50,000 miles or as specified in your vehicle’s maintenance schedule.
Regular power steering fluid flushes help extend the life of the system, ensure smooth and easy steering, and prevent costly repairs.
BG Transmission Fluid Flush
-
A BG Transmission Fluid Flush is a maintenance service that removes old, degraded transmission fluid and replaces it with fresh fluid to ensure smooth operation and extend the life of your vehicle’s transmission.
Over time, transmission fluid can break down due to heat and contamination, losing its ability to properly lubricate and cool the transmission components. This can lead to shifting issues, overheating, and premature wear of internal parts.
During the service, a specialized BG machine is used to flush out all the old transmission fluid, including fluid trapped in the torque converter and lines. The system is then filled with fresh, high-quality BG transmission fluid and, in many cases, a BG transmission conditioner to restore performance and provide extra protection.
-
This service is typically recommended every 30,000 to 60,000 miles, depending on your vehicle and driving conditions. Regular BG Transmission Fluid Flushes help maintain smooth shifting, prevent overheating, and protect against costly transmission repairs.
BG Transfer Case Fluid Flush
-
A BG Transfer Case Fluid Flush is a maintenance service designed to replace the old, degraded fluid in your vehicle's transfer case with fresh, high-quality fluid to ensure smooth operation and protect its internal components.
The transfer case is a crucial part of the drivetrain in all-wheel-drive and four-wheel-drive vehicles, distributing power from the transmission to the front and rear axles. Over time, the fluid in the transfer case can break down or become contaminated, leading to wear, overheating, and potential damage to gears and bearings.
During the service, the old transfer case fluid is completely drained, removing any debris, metal shavings, or sludge that may have accumulated. The system is then refilled with BG’s premium transfer case fluid, specifically designed to handle the heat and pressure of modern drivetrains, ensuring proper lubrication and efficient power transfer.
-
This service is typically recommended every 30,000 to 60,000 miles, depending on the vehicle manufacturer’s guidelines and driving conditions.
Regular transfer case fluid flushes help prevent costly drivetrain repairs, maintain smooth power delivery, and extend the life of your vehicle’s transfer case.